G350-20-K9-EU
SG350-20-K9-EU
Cisco SG350-20 20-port Gigabit Managed Switch
Quantité de ports Ethernet RJ-45 de commutation de base 16
Type de port Ethernet RJ-45 de commutation de base: Gigabit Ethernet (10/100/1000)
Quantité de ports .Gigabit Ethernet (copper): 16
Quantité de ports Combo SFP: 2
Quantité d’emplacements de modules SFP: 2
Connecteur de fibre optique: SFP
Quantité de Ports USB 2.0: 1
Standards réseau: IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z
Soutien 10G: Non
Technologie de câblage Ethernet cuivre: 10BASE-T,10GBASE-T,100BASE-TX,1000BASE-T
Types de câbles soutenus: Cat5,Cat6,Cat7
Capacité de commutation: 40
Débit: 29.76
Répertoire MAC: 16384
Nombre de files: 8
Route statique: Oui
Nombre de routes statiques: 1024
Nombre d’interface IP: 128
Support de trames étendues (Jumbo Frames): Oui
Trames géantes: 9216
Mémoire cache de paquet: 1.5 Mo
Fonctions DHCP: DHCP server,DHCP snooping,DHCP relay,DHCP client
Protocoles de gestion: SNMP v1,2,3
Protocole d’enregistrement GARP VLAN (GVRP): Oui
Protocole ISATAP (Intra-Site Automatic Tunnel Addressing Protocol): Oui
Fonctions IPv4 et IPv6: Dual stack IPv4/IPv6
Comparer
Produits apparentés
-
Cisco, Switch et Accessoires Cisco
Switch cisco WS-C3560V2-48PS-E
Manufacturer :Cisco Systems, Inc
Manufacturer Part Number WS-C3560V2-48PS-E
Product Type: Switch – 48 ports – L3 – Managed
Form Factor Rack mountable – 1U
Switch Ports :48 x 10/100 + 4 x SFP
Power Over Ethernet (PoE) Yes
Flash Memory: 32 MB Flash
Interfaces 24 x 10Base-T/100Base-TX – RJ-45 – PoE
24 x 10Base-T/100Base-TX – RJ-45
1 x console – RJ-45 – management
4 x SFP (mini-GBIC)
Power Device Power supply – internal
Voltage Required :AC 120/230 V ( 50/60 Hz )
Features Redundant Power System (RPS) connector
Width: 44.3 cm
Depth: 29.5 cm
Height: 4.4 cm
Weight :5 kg
MTBF :206,041 hour(s)
Software Included Cisco IOS IP ServicesSKU: n/a -
Cisco, Switch et Accessoires Cisco
Switch cisco C2960S-STACK
Cisco FlexStack stacking with a hot-swappable module and IOS software provides true stacking, all switches in a stack act as a single switch unit. The Cisco FlexStack provides a unified data plane, unified configuration, and single IP address management for a group of switches. The advantages of true stacking are lower total cost of ownership through simplified management and higher availability. Cisco FlexStack supports cross-stack features including Etherchannel, SPAN and FlexLink technology. A stack module can be added to any Catalyst 2960-S switch with LAN Base software to quickly upgrade the switch to make it stack capable, and the switch added to the stack will upgrade to the correct Cisco IOS® Software version and transparently become a stack member. Figure 3 shows the FlexStack stacking module for the Catalyst 2960-S.
SKU: n/a
French