SG500-28MPP-K9-G5
SG500-28MPP-K9-G5
SG500-28MPP 28-port Gigabit Max PoE+ Stackable Managed Switch
Quantité de ports Ethernet RJ-45 de commutation de base: 24
Type de port Ethernet RJ-45 de commutation de base: Gigabit Ethernet (10/100/1000)
Quantité de ports .Gigabit Ethernet (copper): 4
Quantité de ports Combo SFP: 2
Quantités d’emplacements de module SFP+: 2
Entrée DC: Oui
Connecteur d’alimentation: DC-in jack
Capacité de commutation: 72
Débit: 41.67
Répertoire MAC: 16000
Nombre de files: 8
Route statique: Oui
Nombre de routes statiques: 2048
Nombre d’interface IP: 256
Support de trames étendues (Jumbo Frames): Oui
Mémoire cache de paquet: 8 Mo
Fonctions DHCP: DHCP relay,DHCP client
Liste de contrôle d’accès (ACL): Oui
Filtrage IGMP: Oui
Algorithme de sécurité soutenu: SSH,SSL/TLS
Filtrage d’adresse MAC: Oui
Support SSH/SSL: Oui
Comparer
Produits apparentés
-
Cisco, Switch et Accessoires Cisco
Switch cisco WS-C3560V2-24TS-S
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number WS-C3560V2-24TS-S
Product Type Switch: – 24 ports – L3 – Managed
Form Factor Rack mountable – 1U
Switch Ports 24 x 10/100 + 2 x SFP
Performance Switching capacity : 32 Gbps
Capacity Switched virtual interfaces (SVIs) : up to 1000
Virtual interfaces (VLANs) : 1000
MAC Address Table Size 12K entries
Jumbo Frame Support 9016
Routing Protocol: RIP-1, RIP-2, HSRP, static IP routing
Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH
Encryption Algorithm SSL
Flash Memory :32 MB Flash
LED Status Lights Indicators Link activity, port duplex mode, bandwidth utilization %, power, link OK, system
Interfaces 24 x 10Base-T/100Base-TX – RJ-45
1 x console – RJ-45 – management
2 x Ethernet 1000 – SFP (mini-GBIC)
Power Device Power supply – internal
Voltage Required :AC 120/230 V ( 50/60 Hz )
Features Redundant Power System (RPS) connector
Width: 44.3 cm
Depth :29.5 cm
Height :4.4 cm
Weight: 3.7 kg
MTBF :377,260 hour(s)
Software Included Cisco IOS IP BaseSKU: n/a -
Cisco, Switch et Accessoires Cisco
Switch cisco WS-C3560V2-24PS-S
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number :WS-C3560V2-24PS-S
Product Type :Switch – 24 ports – L3 – Managed
Form Factor Rack mountable – 1U
Switch Ports :24 x 10/100 + 2 x SFP
Power Over Ethernet (PoE): Yes
MAC Address Table Size 12K entries
Routing Protocol RIP-1, RIP-2, static IP routing
Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c
Authentication Method Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Flash Memory: 32 MB Flash
LED Status Lights Indicators Port status, link activity, port transmission speed, port duplex mode, system, RPS (Redundant Power Supply)
Interfaces 24 x 10Base-T/100Base-TX – RJ-45 – PoE
1 x console – RJ-45 – management
2 x SFP (mini-GBIC)
Power Device Power supply – internal
Voltage Required: AC 120/230 V ( 50/60 Hz )
Features Redundant Power System (RPS) connector
Width :44.3 cm
Depth :29.5 cm
Height :4.4 cm
Weight :4.6 kg
MTBF :275,360 hour(
Software Included Cisco IOS IP BaseSKU: n/a -
Cisco, Switch et Accessoires Cisco
Switch cisco C2960S-STACK
Cisco FlexStack stacking with a hot-swappable module and IOS software provides true stacking, all switches in a stack act as a single switch unit. The Cisco FlexStack provides a unified data plane, unified configuration, and single IP address management for a group of switches. The advantages of true stacking are lower total cost of ownership through simplified management and higher availability. Cisco FlexStack supports cross-stack features including Etherchannel, SPAN and FlexLink technology. A stack module can be added to any Catalyst 2960-S switch with LAN Base software to quickly upgrade the switch to make it stack capable, and the switch added to the stack will upgrade to the correct Cisco IOS® Software version and transparently become a stack member. Figure 3 shows the FlexStack stacking module for the Catalyst 2960-S.
SKU: n/a
French